Mel-Rol Low Temp is a roll-type, flexible, waterproofing membrane, ideal for use in cold temperature applications. It is composed of a nominally 56-mil thick layer of polymeric waterproofing membrane formulated for maximum adhesion at lower temperatures on a heavy-duty, four-mil thick, cross-laminated polyethylene carrier film. The two components are laminated together under strict quality-controlled production procedures. A handy overlap guideline is printed 2.5' (63.5 mm) in from the material edge on each side to assure proper overlap coverage and to assist in maintaining a straight application. Special exposed polymeric membrane strips are provided on both sides for positive membrane-to-membrane adhesion in the overlap area. The membrane strips are protected by a pull-off release strip. All components of Mel-Rol Low Temp work together to provide a cost-effective, positive waterproofing system that's quick and easy to apply. W. R. Meadows accessory products included in the Mel-Rol Low Temp waterproofing system are BEM, Mel-Rol LIQUID MEMBRANE, MEL-PRIME adhesive, POINTING MASTIC, DETAIL STRIP, HYDRALASTIC 836, TERMINATION BAR, PROTECTION COURSE, and MEL-DRAIN drainage board.